I need to
Get a Solar / Distributed Generation Connection
Connect your private generation equipment to our electricity network.
Get a Solar / Distributed Generation Connection
If you intend to install Distributed Generation equipment on our network, such as solar or wind generation, you’ll need to apply for a Distributed Generation connection.
We have two types of Distributed Generation connections, 10 Kilowatts or less, and above 10 Kilowatts.
Connecting Distributed Generation Equipment of 10kW or Less
To connect Distributed Generation equipment of 10 Kilowatts or less, you’ll need to fill out and complete our online DG1 Form at the link below.
There is some important information you will need to read about our Distributed Generation connection process so, before completing the application form, take a moment to ensure you’re aware of what information we’ll need to process your request.
Connecting Distributed Generation Equipment Above 10kW
To connect Distributed Generation greater than 10 Kilowatts to our network, there are two stages to the process, and both will require you to complete an application – the DG2 Initial Application form, and the DG3 - Final application form.
There is some important information you will need to read about our Distributed Generation connection process so, before completing the application form, take a moment to ensure you’re aware of what information we’ll need to process your request.